The Sigelei 20W is a robust variable power device based on the SX200 chip. It can vary in voltage from 3.0 to 8.8 volts in 0.1 volt increments or 7 to 20 watts in 0.1 watt increments. The Sigelei 20W can handle an atomizer resistance range between 0.5 and 5.0 ohms. The device features a beautiful stainless steel design, an easy to read digital display, and a removable drip well for compatibility and easy cleaning. Settings are controlled via use of a built in accelerometer (tilting the device).
Variable wattage - adjustable from 7.0W to 20.0WVariable voltage - adjustable from 3.0V to 8.8VSupports 0.5-5 Ω AtomizerFeatures a 5 click On/Off switchOLED display:(resistance, voltage/wattage, settled vaping time, battery level and puffs)Accelerometer5-20 seconds cutoffShort circuit protectionLow voltage warningReverse polarity protectionRemovable top capFloating 510 center pin510 and eGo threadingCompatible with Single 18650 Battery(Battery Sold separately)
Sigelei now has introduced a new advancement in the APV (advanced personal vaporizer) market:Sigelei 30w(An upgrade version of Sigelei 20w Mod), Using the SX300 chip , the Sigelei 30w mod can go up to a whopping 30 watts! The unit offers a gravity sensor system, a large display area OLED screen.
You are looking at a nicely crafted HCigar Chi You Mechanical Mod Clone. Available in stainless steel polished finish or Brass with silver plated contacts, provides a nice heavy feel with smooth threading lock springs. Each Chi You Mechanical Mod Clone is engraved with a production number, along with laser etched Chi You logos.
Cloupor T5 50 w device is the high end of mod products. There are many high quality mod in the market, such as hana dna 20/30 mod, Joyetech evic and ipv2,but the cloupor T5,is more powerful and great hold feeling. comfortable design with large OLED screen that allows you to see the settings with ease,Of course it is safe with the high technology chips inside.Main Features:
*The Chip is entirely designed by cloupor *Acceptable resistance : 0.2-3.5ohm *Output power: 7W-50W *Output voltage : 3.6V—9.3V *Super big OLED screen :64*128 dpi *Suitable for 18650 battery *Reverse battery protection , no worry about installing battery improperly *Instead of screen lock, It can be turned off *Display battery power in percentage as well as graphic Record accumulated vaping puff *With CPU temperature control system, it will stop working automatically once over temperature warning—Much safer *The board with self-heat dissipation system *Show notice when charging by USB *Diameter:43mm Height:11.11cm
Here is the Video from Cloupor:
Cloupor T6: * Chip is 100% designed by cloupor *The firmware can be updated *Output power: 7W - 100W *Output voltage : 3.6V—9.8V *It can be used to 0.2-3.6 ohm atomizer *Reverse battery protection , no worry about installing battery improperly *Instead of screen lock, It can be turned off *Display battery power in percentage as well as graphic Record accumulatedvaping puff *With CPU temperature control system，it will stop working automatically once over temperature warning .. Much safer *The board withself-heat dissipation system *House Single 26650 battery *510 connectionNote:we only have Black and Silver available!
The Cloupor T8 is the killer of all box mods currently. It packs a whoping 150 watts and beautifully crafted box mods compared with the others.
Sparta Mod Exclusive Features:
• Bottom Magnet Firing.
• Adjustable upper copper pin to fit well with atomizers.• Standard 510 threading built.
• Bottom locking ring.
• Material: Copper and Stainless steel • Laser engraving logo & series number and patterns
NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
The newly redesigned KTS+ Mechanical Flat-Top is a clone of the GG.It is telescopic and can accept an 18650, 18500 and 18350 protected or IMR batteries. There are also vent holes drilled above the button. It is made from chrome plated brass, which makes it much lighter than stainless as well as a great conductor.This mod is not recommended for novice users.The KTS+ Mechanical Flat-Top works perfectly with the KICK and is machined extremely well. The mechanical fire button is located at the base of the unit and is quite comfortable to use.It also has a knurled nut to lock it in place so the unit does not accidentally fire.Details:510 thread, suitable for 510 series atomizersThis battery compartment is compatible with 1*18650 or 1*18500 or 2*18350 batteries (batteries not included)
An internal error occurred while trying to add you to our mailing list.