eGo C kit is recommended because of eGo C replaceable atomizers. If the atomizers can not work, you do not need to replace the complete atomizer, just replace a new atomizer head. The eGo-C can indicate the remain power, so you will know easily when to charge the battery. Both atomizers and batteries are compatible with earlier eGo / eGo T batteries and accessories. we also have 1100mAh eGo C(Changeable System) Starter Kit for your choice.
152mm for length
14 mm for diameter
3hs for charging time
Cartridge for eGo C
200 puffs (2s per puff)
1000mAh for capacity
97mm for length
1300 puffs for full battery
More than 300 times for battery life ( charge&discharge cycle times)
Weight per set
142 * 82 * 66mm
Unscrew the atomizer base with your hand.Take out the old atomizer head.Assemble the new atomizer head.Screw the atomizer cover.
Please note:The eGo-C atomizer utilizes the standard eGo-T Type A liquid tanks. Easy to fill and simple to monitor remaining liquid.The eGo-C batterie's button have a 5-click On/Off lock the same as eGo T batteries. Please press the button 5 clicks within 2 seconds and activate the battery.The eGo-C battery can indicate the remain power. From 100% to 51% capacity remaining, the button will illuminate white. At 50%-10% capacity remaining, the button will illuminate a light blue color. Below 10% capacity remaining, they will light up a dark blue color.No need to constantly drip ejuice inside the atomzier. The kit comes with empty tank cartridges.Please fill them with ejuice/eliquid before using it.Ejuice/eLiquid which contain all or a mix of VG may not feed very well in the eGo-T /eGo-C system.
Battery & body: 60 days.Other parts: only accept DOA.
Specially designed for Epipe DSE601C. The cartomizers are not prefilled with ejuice.
Each cartomizer has the same 510 threading and diameter as 510 cartomizer. So it can fit most batteries with 510/eGo threading.
Brand:DSEUnit:5pc/packShipping weight:42gTube size:Length 40mm;Diameter 9.2mmColor:silverVolume: 0.9ml (200-230 mouthfuls)Resistance:2.1-2.4ohmPackage:Simple
Each cartomizer can hold 1.0ml ejuice at most, but 0.9ml is recommended to avoid overfilling.
Please use an ejuice injector to fill the cartomizer.
Fill the ejuice slowly, or the ejuice may drip out of the cartomizer from the bottom.
133mm for length
650mAh for capacity
71mm for length
900 puffs for full battery
iTaste MVP 2.0 iClear 16B Dual Coil Energy Line Kit is the newest series from INNOKIN.
Features:1.iclear 16B BDC clearomizer,this newest clearomizer is made with the newest bottom dual coil system,so it can produce more vapor and forward ejuice more easiyl to the heating part than regular clearomizers.2,Distinct appearance,all are printed so the paint on body is not easy to peel off.
Besides,it share the same features with original MVP 2.0 body:1, the vaping button is responsive and more convenient to operate.2, the color of the display has been changed from red to blue, giving it more soft feel. The function of two buttons beside the screen changed.3, iTaste MVP 2.0 not only allows you to adjust voltage from 3.3 volts to 5 volts but also you can adjust wattage.Wattage can be adjusted from 6.0 –11.0 W by 0.5 watts increments.4, the iTaste V2.0 has added the ohm meter. It will display resistance of the attached atomizer, then it will display the current voltage after 2 seconds.Battery Level Indicator:The iTaste MVP battery capacity is displayed via green, yellow and red LED lights.Green = Fully ChargedYellow = Half DischargedRed = In need of charging
Each kit contains:1x Innokin iTaste MVP 2.0 body 1x Innokin iclear 16B clearomizers(2.1ohm)1x universal USB cable1x MVP cover1x Englishh instructional manual
Innokin iTaste SVD Complete KitThe iTaste SVD (Superior Vaping Device) is a tube style, variable voltage, variable wattage Electronic Cigarette, made of Stainless Steel. It features a unique "telescoping" tube which adjusts to several sizes of 18mm wide batteries such as the 18350, 18500 and 18650. We recommend AW IMR 18650 batteries for this device.The SVD has both variable voltage or variable wattage operation. The voltage can be adjusted from 3.3 volts to 6 volts in .1 volt increments and the wattage is adjustable from 3 watts to 15 watts in .5 watt increments.Current output is rated by the manufacturer to by 5 amps max current load.The iTaste SVD full kit also features:Short Circuit ProtectionReverse Battery Protection CircuitBattery Voltage DetectionResistive Load Detection (Ohms meter)ON/OFF battery switchLED Battery Power DisplayLow Voltage WarningOvertime Vaping WarningTelescopic Tube supports 18350, 18500 or 18650 batteries510 and eGo threaded, compatible with many popular atomizers, cartomizers and clearomizers (Thread fits iClear10, iClear16, iClear30, CE4, CE5, eGo, T2, T3, VIVI NOVA, 510, etc)Remembers last set voltage or wattage when switching batteriesBuilt-in 3 digit display (Ohms meter, Volts /Watts, Atomizer voltage output)Including:(1) SVD main body(1) SVD short battery tube(1) SVD long battery tube(1) Thread cover ring(1) iClear 30 dual coil clearomizer(3) iClear 30 coils(1) User manual(1) Kit box
How to use the itaste SVD Mod?please click here!
All the best things about the iTaste MVP, SVD and 134 come together in Innokin's VTR. This device is built like a tank and hits the same way. The VTR can be adjusted from 3.0 to 6.0 volts in .1-volt increments, or from 3.0 to 15.0 watts in .5-watt increments. It features a recessed 510 connection, which gives the VTR a unique look when appropriate tanks are attached. This kit comes included with an adapter to allow the use of eGo-threaded atomizers or any device that simply won't fit into the recessed area, while maintaining a uniform look. The VTR uses an IMR 18650 battery, which will last most users all day. It also features a built-in ohm-meter to check the resistance of your attached coil. There is no other mod quite like this one! No clearomizer come with this kit.
Features in Brief:* Variable Voltage: 3.0 – 6.0 volts* Variable Wattage: 3.0 – 15.0 W* Short Circuit Protection;* RMS (root mean square);* Reverse Battery Protection Circuit;* Resistive Load Detection (Ohms meter);* ON/OFF battery switch;* LED Battery Power Display;* Low Voltage Warning;* Overtime Vaping Warning (10 second switch cutoff);* Battery safety protection (Vent holes);* High compatibility 510/eGo connector: * Built-in 3 digit display (Ohms meter, Volts /Watts, Atomizer voltage output)* Replaceable Battery: iTaste VTR supports 18650 batteries (unprotected)* Maximum Current Output: 5.0 Amperage* The iTaste VTR fits perfectly with iTaste Leather Carrying Case for MVP!
iTaste VTR Mod doesn’t come with any battery or charger .We recommend you use IMR high drain 18650 (without protection), Other types of batteries may damage your iTaste VTR.
PACKAGE CONTENTS:1*VTR, 1*Adapter Cone, 1*iClear 30S Clearomizer, 1*Metal Case, 1*Manual
Innokin Cool FireⅡStarter Kit is the newest product from Innokin,it has many features that make it stand out.
Features:1.Adjust wattage by the rotational wheel.2.ON/OFF battery switch. Press the switch 3 time to turn on/off the mod,the LED blinks red-yellow-green when turn it on,LED only be red when turn it off.3.LED Battery Power Display. Green LED light means full charged. Yellow LED light means half charged. Red LED light means low battery and charge needed.4.Low Voltage Warning.
Packgae Contains: 1pc Innokin Cool fireⅡ body/ 1pc Innokin iClear 30B clearomizer/1pc Beauty ring /1pc English Manual /1pc paper box
5.variable wattage:the rotational wheel adjusts wattage to the following:7.0,8.0,8.5,9.0,9.5,10.5,11.0,12.0,12.56.Support unprotected 18350 batteries.
Besides,the Innokin Cool FireⅡ has a regular 510/eGo connector and can fit a variety of 510/eGo atomizers or tanks, or clearomizers like Innokin iclear 30 clearomizer with replaceable coil.
How to use?please click here!
PACKAGE CONTENTS:1*iTaste 134 Mod, 1*iClear30 clearomizer, 1*Beauty Ring, 1*Metal Case, 1*English Manual
This is the newest Epipe which works with a clearomizer,it accepts a 18350 li-ion battery.
There is no light on the epipe body to show if the mod is on or off,when the li-ion battery is installed,you can use it directly by pressing the button.
NOTE:Any 510 clearomizer can't be screwed on the epipe body without the control switch(comes with the kit).
It is the latest electronic pipe with exchangeable cartomizer. It is a save of both time and money to change only cartomizers when cartomizers run out or gets dead.
The epipe uses an unprotected li-ion 18350 900mAh battery. A fully charged battery can support 800-900puffs.
You can see the mark + and - on both ends of each battery. + means positive pole. - means negative pole.
Brand:DSEUnit:1pcShipping weight: US plug (860g) /Euro plug (840g) /UK plug (890g)18350 Li-ion Battery Capacity:900mAhOutput voltage:3.3v-4.2vCartomizers' tube size:Length 40mm;Diameter 9.2mmCartomizers' color:silverCartomizers' volume: 0.9ml (200-230 mouthfuls)Cartomizers'resistance:2.1-2.4ohmLength of epipe:156mmPackage:Gift box
Step 1: Install battery and replace cartomizer rightly.
Step 2: Remove the light holder and a small LED light will show at the edge of the battery holder.
When installing the pipe and the positive plate touches the lead plate, the LED light quickly flashes green once to indicate the connection.
The light goes red when at work, and it turns off in stand by mode.
When the battery voltage goes below 3.4v, the light keeps flashing to indicate low power.
Please put the battery on the charge.The LED light on the charger is red when charging the battery and it turns green when the battery is fully charged.When charging the battery, please make sure that the polarity of the charger and battery be the same.
Each cartomizer can hold 1.0ml ejuice at most, but 0.9ml is recommended to avoid overfilling.Please use an ejuice injector to fill the cartomizer.Fill the ejuice slowly, or the ejuice may drip out of the cartomizer from the bottom.
The E-fire 2 Variable Voltage Wood Mod is a 1000 mah variable voltage Spinner battery. The battery housing features a beautiful, laser-etched design that is truly amazing to see. Each kit contains one E-Fire 2, a Pyrex nova clearomizer and ego plinth. Put it all together and you have one gorgeous looking vaporizer that would add a focal point to any collection. Due to the real wood housing, coloration may vary.
- Variable Voltage 3.3 to 4.8 volts (Volt markings are etched into the wood)
- Laser-etched wood housing
- Available in 7 unique designs
- On/Off button
- Pyrex Nova Clearomizer
- 510/eGo connection
- Faux wood latch case
PACKAGE CONTENTS:1*Pipe Style Mod, 1*Mini Clearomizer, 1*Protective Shield
It is the classic Joye eGo kit for Joye 510 atomizers fans. With a 510 atomizer and a Joye eGo C upgrade 650mAh battery, you can keep vaping for a few hours and do not need to charge battery constantly. eGo C upgrade battery has 5 clicks on/off function too. No more accidental activations.
Model : eGo Starter Kit [650mAh]Length : 118 mm / Diameter : 14 mmWeight for single cigarette : 36.8gNicotine content for each cartridge : 0.32g Mouthfuls for each cartridge keep : 300 mouthfuls Nicotine content of each cartridge equals traditional cigarette :20pcsContent of battery : 650mAh Normal working voltage : 3.3V-4.2V Full battery can keep for : 700 mouthfuls Charge time : 2-3 hours Life of battery : 400times charger
The upgraded eGo-C battery is impressed because it has 2 modes to switch. One mode is the constant voltage output mode at 3.3v, same as eGo C battery. The other mode is variable voltage mode, which works from 3.6v to 4.15v.You can easily switch the mode according to the following steps:
1.From constant voltage output mode to new battery voltage output:1.1 When the mode is 3.3v constant output mode,you can lock the battery by 5 clicks(blue LED blinks 3 times)1.2 By pressing button for 5 seconds, LED will change to orange with 3 blinks,the battery has switched to variable voltage output mode(battery voltage output mode).1.3 Then you can use as usual by 5 clicks off and smoke in battery voltage output .1.4 In new battery voltage output mode,the LED is orange and battery doesn't have power display function.1.5 When charging ,orange LED will blink 5 times in this new mode.
2.From new battery voltage output to constant voltage output mode:2.1 In new battery voltage out put mode ,you can lock the battery by 5 clicks again(orange LED blinks 3 times).2.2 By pressing button for 5 seconds,LED will change to blue with 3 blinks.And the mode has switched to 3.3v constant voltage output mode.2.3 Then you can use as usual by 5 clicks off and smoke in 3.3v constant voltage.2.4 In 3.3v constant voltage,the battery features has no difference from present eGo-C battery.2.5 When charging,blue LED blinks 5 times in this mode.
Screw the battery into the USB charger Insert the charger into a computer or the flat mini wall USB adapterCharging time: around 2.5hours
The switch light on battery will flash for several times and the LED light is red once they connect to a power source. Then the light on battery will go out.When the battery is fully charged, the LED light will turn to green.
1. length:118mm,diameter:14mm2.Ego-t battery power:650mah,3.7-4.2v3.The battery life of this super e cigarette :300 charging4.super e cigarette charging time:2-2.5 hours5.ego-t each cartridge:300-450 puffs
Unit: setShipping weight:375g
Tank system, good vapor, pure and clean tasteeGo T battery, 5 clicks on/off protection, no more accidental activationsEverything needed to start vaping is included
Remove the original hard plastic capDrop e-juice into tankPut the soft prevention cap on insteadHold the tank and Insert atomizer tightly into itUpside down the atomizer
with a customized overflow prevention cap, there is no overflow even when you inhale with much effort.The manual in eGo T Type B kit is the one for Type A as the two kits share the same usage.
PACKAGE CONTENTS:1*Electronic Cigarette, 1*USB Charging Cable, 1*Empty Bottle, 1*Plastic Box
PACKAGE CONTENTS:1*Electronic Cigarettes, 1*AC Power Adapter, 1*USB Charging Cable, 1*Empty Bottle, 1*Carrying Pouch
We are proud to introduce Kanger EVOD Starter kit with BCC Clearomizer because it is a great peformance on Kanger MT3 Clearomizer.
1. EVOD clearomizer has the same bottom coil heating system, same ego threading and great performance as kanger MT3 clearomizer. But EVOD's bottom coil head and metal base is detachable, so it will be less expensive to replace a coil. when the coil head dies, you can keep the metal base and replace only the mini coil head. Each EVOD clearomizer can hold 1.6ml ejuice, so someone call it Mini MT3.
2. EVOD battery is customized for the EVOD clearomizer, although EVOD clearomizer can work well with most eGo/eGo T/eGo C batteries, like MT3 does. Each EVOD battery has 3.7V constant output voltage, which makes sure its constant performance no matter it is fully charged or not.
Each kit contains:2pc Evod Manual Battery(Constant output voltage:3.7v; Capacity:650mAh)2pc Evod BCC(Bottom Coil Changeable)1.6ml Clearomizer (Resistance:2.5ohm)5pcBottom Coil Heads (Resistance:2.5ohm)1pc 500mah eGo Fast USB Charger1pc AC-USB with US or EU plug available1pc English User Manual
How to replace the coil heads for EVOD Clearomizer?please click Here!
How to refill EVOD Clearomizer?Please click Here!
PACKAGE CONTENTS:2*Electronic Cigarette, 1*USB Charge, 1*Wall Charger, 1*Brush, 1*Tool
Dimensions: 37.1mm USB cable: 1.2m Variable voltage from 3.0-3.7-4.0V Clearomizer Color LED light
Corn USB pass through tank e cigarette Item: USB pass through tank Packaging: Blister packageCertification: CE, RoHS, FCC, FDA Parameter: Cigarette Size: L37.1mm Each clearomizer can supply: 500 mouthfuls LED light change color: 3.4V blue/3.7V pink/4.0V red Normal working voltage: 3.4V-3.7V-4.0V
An internal error occurred while trying to add you to our mailing list.